Publicité
ER02
Overcurrent error
ER03
High input voltage
ER04
Low input voltage
ER05
Over heat error
ER06
Input electricity
power of AC motor
has problem,
maybe two-
phaze(The normal
situation is three-
phaze)
ER07
Safety key error
ER09/10
Inverter hasn't work
normally
To order spare parts
To guarantee an efficient service, make sure you have the following items before you
contact our After Sales Service:
The name or reference of the product.
The manufacturing number shown on the main chassis and on the packing box.
The number of the missing or faulty part shown on the exploded view of the
Product described in this manual.
The inverter break
a. The AC input voltage is too
high
b. Inverter break
a. The AC input voltage is too
low
b. Inverter break
a. The fan doesn't work, and
has problem
b. Inverter break
Connection of motor's cable has
problem, maybe loosens
Safety key has not connected on
machine normally
Inverter hasn't been started
working normally
After Sales Service
Email:
service-uk@carefitness.com
Replace the inverter
a. Check the AC input voltage
b. Replace the inverter
a. Check the AC input voltage
b. Replace the inverter
a. Check whether fan works normally
when power on
b. Replace the inverter
Check whether motor's cable is
connecting normally.
Check whether safety key has been
stuck, or put on machine properly
a. Replace the inverter's cable to
check whether this error happens
again
b. Replace the inverter
Publicité
