Publicité
How to add lubrication in oil tank
CHECK ONCE A MONTH THE TANK
Step 1: Remove motor cover
Step 2: Remove the tank lid by twisting the lid anticlockwise.
ATTENTION
DO NOT EXCEED THE 2/3 TANK
Step 3: Add lubrication in oil tank until 2/3 volume of tank is full.
(The total volume of tank is about 300ml, so 2/3 is 200ml.)
(There will be 6 bottles of lubrication in packing list, which is about 200ml in total)
Step 4: Install the tank lid by twisting the lid clockwise tightly.
Step 5: Install the motor cover.
TROUBLE SHOOTING
Error Code
ER01
Communication
error
Possible Cause
a. Inverter and console lose
connection, maybe because the
connection cable loosens
b. Inverter break
Recommended Action
a. Re-connect the connection cable. If
it happens again, replace the cable.
b. Replace the inverter
Tank lid
Oil tank
Publicité
