Maintenance And Repairs - Stihl FS 40 Notice D'emploi

English
Engine power to 0.8 kW at
ISO 8893: 8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed (rated): 10,000 rpm
Max. output shaft
speed (cutting
attachment): 10,600 rpm
Ignition system
Electronic magneto ignition
Spark plug (resistor
type): NGK CMR 6 H
Electrode gap: 0.5 mm
This spark ignition system meets all
requirements of the Canadian
Interference-Causing Equipment
Standard CAN ICES-2/NMB-2.
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity: 340 cc (0.34 l)
Weight
Dry, without cutting attachment and
deflector
FS 40:
FS 50:
FS 50 with long shaft:
FS 40 C with Easy2Start:
FS 50 C with Easy2Start:
FS 50 C with Easy2Start
and long shaft:
30
Overall length
without cutting attachment
FS 40:
FS 40 C:
FS 50:
FS 50 C:
FS 50 with long shaft:
FS 50 C with long shaft:
4.4 kg
4.4 kg
4.5 kg
4.5 kg
4.5 kg
4.6 kg

Maintenance and Repairs

Users of this machine may only carry out
1450 mm
the maintenance and service work
1450 mm
described in this user manual. All other
repairs must be carried out by a
1450 mm
servicing dealer.
1450 mm
STIHL recommends that you have
1650 mm
servicing and repair work carried out
1650 mm
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
FS 40, FS 40 C, FS 50, FS 50 C