Publicité
measured value line
switched on.
Now measure the length L2 of the second wall.
The measured value
ured value line is added to the length L1. The
sum of the two lengths can be found in the
middle measured value line
You can measure any number of lengths LX,
which will be automatically added and multi-
plied by the height H.
Stake-Out function
The stake-out function
defined length (distance). These lengths can be
transferred to a surface, for example to enable
material to be cut into pieces of equal length or
to install stud walls in a drywall construction. The
minimum adjustable length is 0.1 m and the max-
imum length is 75 m.
In the stake-out function
the marking shown in the display
ence level is not the edge of the measuring tool.
In Stake-out function
or the button
Press and hold the button
ton
8
crements.
Press the button
function and distance yourself slowly from the
starting point.
d
d
repeatedly measures a
to set the required length.
8
to change the length by larger in-
4
. The laser remains
displayed in the meas-
.
d
(see fig. I)
, the reference level is
. The refer-
5
, use the button
or the but-
1
to start the stake-out
GB/IE
1
79
Publicité
