Publicité
EMERGENCY MODE
•
Familiarise yourself with the use of this
product with the help of these
instructions. Commit the safety
instructions to memory and follow them
to the letter. This will help you to avoid
risks and dangerous situations.
•
Always pay attention when using this
product, so you can detect and handle
risks at an early stage. Prompt action can
prevent serious personal injury and
material damage.
•
Switch off the machine and disconnect it
from the power supply in the event of a
fault. Ensure that the product is checked
by a qualified technician and if necessary
repaired before you use it again.
OTHER RISKS
Even if you use this product in line with all
safety requirements, there is still a risk of
personal injury and material damage. The
following risks related to the design and
construction of this product can occur:
–
Effects on health from vibrations if
the tool is used for long periods, or is
not handled and maintained
correctly.
–
Personal injury and material damage
as a result of defective accessories or
sudden contact with concealed
objects when using the tool.
–
Risk of personal injury and material
damage as a result of ejected
objects.
WARNING!
This product produces an electromagnetic
field when in use. This field can in some
circumstances affect active or passive medical
implants. To reduce the risk of serious or
life-threatening injury, we therefore advise
persons with medical implants to consult
their doctor and the manufacturer of the
implant before using this product.
REDUCTION OF NOISE
AND VIBRATIONS
•
Plan the work so that exposure to heavy
vibrations is spread over a longer period.
•
To reduce noise and vibrations when in
use, limit the time the tool is in use, and
use low-power/vibration mode and
suitable safety equipment.
•
Take the following precautions to
minimise the risks of exposure to
vibrations and/or noise:
–
Only use the tool in accordance with
these instructions.
–
Check that the tool is in good
condition.
–
Use accessories in good condition,
and which are suitable for the
purpose.
–
Keep a firm grip on the handles/grips.
–
Maintain and lubricate the tool in
accordance with these instructions.
WARNING!
•
Vibration levels can deviate from the
declared value, depending on how the
tool is used. Suitable precautions for
users must be based on the actual
conditions, taking into account all parts
of the operating cycle, such as the time
when the tool is switched off and the
idling time, in addition to the time when
the power switch is pressed.
•
The given values are measured actual
noise levels, which are not necessarily
safe to work in.
•
Even if there is a link between the
specified noise level and experienced
noise level, it is not possible on this
basis to draw any reliable conclusions
concerning the need for safety
measures. Several other factors affect
exposure to noise in each individual
case, for example the acoustics in the
work premises and any other sources
of noise, such as other machines or
EN
55
Publicité
