Publicité
2 Put detergent or a dishwashing tablet in the machine and run a standard
program.
3 Leave the parts to air-dry on a clean tea towel or drying rack.
Step 3: Disinfecting
Supplies needed:
-
Household pot
-
Drinking-quality water
Caution: During disinfection with boiling water, prevent the parts from
touching the sides and bottom of the pot. This can cause irreversible
product deformation or damage that Philips cannot be held liable for.
Disassemble, clean and disinfect the following parts before first use and after
every use: membrane, cup, valve, breast shield, insert (if used), breast shield
(dust) cover.
1 Fill a household pot with enough water to cover these parts and place all
the parts in the pot. Let the water boil for 5 minutes. Make sure the parts
do not touch the sides and bottom of the pot.
2 Allow the water to cool down.
3 Gently remove the parts from the water. Leave the parts to air-dry on a
clean tea towel or drying rack.
4 Store the dry items safely in a clean, protected area until needed. Ensure
that the clean parts have air-dried completely before storing them to help
prevent germs and mold from growing.
Using the collection cups
Sizes of the breast shields and inserts
Warning: Using an incorrectly sized breast shield and insert may
cause pain, discomfort, and improper nipple positioning during
pumping. Prolonged use may lead to nipple or breast tissue injury,
inflammation, or blocked milk ducts. Ensure proper fit before use.
The Philips Avent hands-free collection cup has a soft breast shield that can be
used individually or with a flexible silicone insert for a better comfort. There
are multiple sizes available.
Measure your nipple to find the most suitable breast shield and, if necessary,
the insert for you.
1 Use the nipple sizing card that is included in the package or refer to
www.philips.com/support to measure your nipples.
2 Stimulate your nipple prior to measuring your size.
9
English
Publicité
