Publicité
8
English
Step 1: Disassembling
Completely disassemble all parts that come into contact with the breast and
breast milk. Make sure that you:
-
Remove the valve from the cup.
-
Separate the membrane and front cap.
-
Remove the insert (if used) from the breast shield.
Step 2: Cleaning
Warning: Do not use antibacterial or abrasive cleaning agents to
clean the collection cup parts as this may cause damage.
Clean the following parts before first use and after every use: membrane, cup,
valve, breast shield, insert (if used), breast shield (dust) cover. You can clean
these parts manually or in the dishwasher.
Step 2A: Manual cleaning
Supplies needed:
-
Mild dishwashing liquid
-
Drinking-quality water
-
Soft, clean brush
Caution: Be careful when you remove and clean the valve. If it gets
damaged, your breast pump does not function properly. To clean the
valve, rub it gently between your fingers in warm water with some
dishwashing liquid. Do not insert objects into the valve, as this may cause
damage.
1 Rinse the parts under a running tap with lukewarm water.
2 Soak the parts for 5 minutes in warm water with some mild dishwashing
liquid.
3 Clean the parts with a cleaning brush in warm water with some mild
dishwashing liquid.
4 Thoroughly rinse the parts under a running tap with drinking-quality water.
5 Leave the parts to air-dry on a clean tea towel or drying rack.
Step 2B: Cleaning in the dishwasher
Supplies needed:
-
Mild dishwashing liquid or a dishwashing tablet
-
Drinking-quality water
Note: Food colorings may discolor parts.
1 Place all parts on the top rack of the dishwasher. Use a dishwasher basket
for the smallest parts.
-
Clean tea towel or drying rack
-
Clean sink or bowl
Publicité
