weltico EASYLED EVO Notice D'utilisation page 12

EN
1. TECHNICAL CHARACTERISTICS LED PAR56 LAMP TUNABLE
Tunable COLOR
10 colors / 5 sequences of linked colors
change of colors or sequences (standard) by switching off
the power switch «on / off»
change colors or sequences with a kit (optional): on / oFF
remote control or multifunction module.
Keep in memory after switching off the bulb the color or
the predefined sequence.
2. RECOMMENDATION
turn off the power supply to projectors and replace the bulb following the instructions in the projector's usage notice.
if the external flexible cable or cord of this luminaire is damaged, it must only be replaced by the manufacturer, its service
agent or similarly qualified person, in order to avoid all risks.
Provide a power supply 10% higher than the power absorbed by the bulb. For example: a power supply of 100 v.a provides
power for 2 bulbs tunable color. 2 x 45 = 90 v.a. the voltage drops can be very strong on bad connections, lugs and son
loose oxidized.
see the table below to identify the section of cable depending on the length and power :
12 Leds Tunable white
Cable section
2 x 1,5 mm2
2 x 2,5 mm2
2 x 4 mm2
2 x 6 mm2
2 x 10 mm2
For optimum light in your pool, always keep the bulb as below:
EASYLED EVO TUNABLE - 05/2020
20 W
Distance Max Box/
Projector
14 ml
24 ml
38 ml
57 ml
94 ml
9 programs that allow you to vary from warm white to cool
white.
change of blank sequences (standard) by switching off
the power switch «on / off»
changing white sequences using the kit (optional) receiver
controller-modulator with wireless remote control.
Keeps in memory after switching off the bulb the
predefined blank sequence.
Attention
12 Leds Tunable Color
Cable section
2 x 1,5 mm2
2 x 2,5 mm2
2 x 4 mm2
2 x 6 mm2
2 x 10 mm2
12 en
Tunable WHITE
36 W
Distance Max Box /
Projector
8 ml
13 ml
21 ml
31 ml
52 ml