Publicité
FEATURES
PRODUCT SPECIFICATIONS
Blade Diameter .......................................................6-1/2 in.
Blade Arbor ............................................................... 5/8 in.
Cutting Depth at 0º .................................................2-1/8 in.
KNOW YOUR CIRCULAR SAW
See Figure 1, page 15.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BEVEL ADJUSTMENT LEVER
The bevel adjustment lever allows you to set the circular saw
for bevel cuts from 0° to 50°.
NOTE: There are detentes in the bevel scale to make it easier
to set the blade angle at 45°, 30°, 22.5°, or 15°.
BLADE WRENCH STORAGE
Conveniently stores your blade wrench for quick blade
changes.
CALIFORNIA PROPOSITION 65
WARNING:
This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities may
contain chemicals, including lead, known to the State of California to cause cancer, birth defects, or other reproductive
harm. Wash hands after handling.
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products and,
• arsenic and chromium from chemically treated lumber.
Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your
exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially
designed to filter out microscopic particles.
Cutting Depth at 45º ...............................................1-5/8 in.
No Load Speed ..................................... 5,000 r/min. (RPM)
Motor .................................................................. 18 Volt DC
BLOWER PORT
The blower port clears dust and debris from the cutting area.
DEPTH ADJUSTMENT LEVER
The depth adjustment lever adjusts the depth of cut from
0 in. to 2-1/8 in.
LED LIGHT
The LED light, located on the front of the tool, illuminates
when either the switch trigger or grip light switch is de-
pressed.
LOCK-OFF BUTTON
The lock-off button reduces the possibility of accidental
starting.
SPINDLE LOCK
The spindle lock allows you to secure the blade when turn-
ing the blade screw.
7 - English
Publicité
Chapitres
