Listening To Cassettes - Panasonic Rx-Ed707 Manuel D'utilisation

PRESET EQIREV MODE C-RESET DECK 1/2
mie:
TOP PANEL
S.WOOFER SVIRTUALER cLOSE OPEN
— VOLUME +
DECK 1 ) DECK 2
|
OQO
Tape travel direction
indicator
VOLUME
Indicates the selected deck
| Listening to Cassettes |
Tapes can be played back in either deck 1 or deck 2.
Types of tapes which can be played on this unit:
The unit automatically identifies type of tape.
Normal position/TYPE | | © ü |]
High position/TYPE II ae ae
Metal position TYPE IV ee Sere
Press (POWER A].
(When using batteries for the power supply}
Press [E TAPE/CD] to select the cassette
mode.
TAPE — CD
(The display changes each time the button is pressed.)
Press [4 DECK 1] or [4 DECK 2], load the tape
and close the lid.
The direction is automatically set to play the top side ("[=>" is
displayed).
kj Press [REV MODE] on the remote control to
select the mode.
preno S Sa Eaa À
(The display changes each time the button is pressed.)
=> Both sides are played.
C32): Both sides play repeatedly until [E TAPE/CD) is
pressed.
(Both decks play continuously if they are loaded.)
=: One side is played.
4 Press [<4 > TAPE].
"FWD" is displayed and play begins. ("REV" is displayed when
play begins while "<4" is displayed.)
[=>: The side which is facing up is played back.
<=]: The reverse side is played back.
H Adjust the volume level.
To stop play:
Press [M TAPE/CD]. :
To stop play from the remote control.
Press [W].
To listen to the other side of the tape:
Press [<4 > TAPE] during playback.
Pressing [4 _> TAPE} automatically turns the unit on, and if a tape
is inserted, begins play (only when AC power is supplied}.
The unit cannot be turned on trom the remote control when batteries
are being used to power the unit.
Changing the deck
The deck loaded last is automatically selected.
Press [DECK 1/2] to select deck 1 or 2. FE]
If one deck is selected and an operation is started, any operation on
the other deck ceases.
"
jsi
6uiua