Selecting And Listening To Favourite Tracks (Program Play) - Panasonic Rx-Ed707 Manuel D'utilisation

Listening
ROT4598
Track number Play time
Play sequence
Programmed track
Ema
2
SLEEP DISPLAY |F MODE
PRoGRAM | G2 CD ee) É
= (ele OOo StL
ile
| Listening to CDs |
Selecting and listening to favourite
tracks (Program play)
Up to 36 tracks can be programmed.
EX Press [m TAPE/CD)] to select the CD mode.
When "(RANDOM)" is displayed, press [RANDOM] on the re-
mote control to clear the display.
2 Press [+] or [—] to select the desired track.
Press [MEMORY æ CLEAR (CD)] to record the
selection.
Continue programming by repeating steps H
and El.
Press [b/11 CD).
Selected tracks play in the programmed sequence, and play
automatically stops.
When using the remote contro! EJ
®© Press [B/CLEAR] to select the CD mode.
© Press [PROGRAM]. "(el)" illuminates.
@) Press the numbered buttons to select the track to be
programmed.
@) Press [> A1].
To cancel program play:
{From the main unit)
Keep {MEMORY CLEAR (CD)] pressed when CD is in stop
mode until "CLEAR" is displayed.
(From the remote control}
Press [B/CLEAR] when CD is in stop mode to display "CLEAR".
Program play can also be cleared by pressing [4 CD OPEN/
CLOSE].
When "——:——" is displayed:
Total play time of the programmed tracks exceeds 100 minutes.
Tracks can still be programmed and played.
When "FULL" is displayed:
36 tracks have already been programmed. No further tracks can be
programmed.
To check programming:
Press [A/ pp] or [v/ kta] when CD is in stop mode.
The track number and its play sequence can be checked each time
these buttons are pressed.
Memory retention of programmed tracks:
Track programming is retained even if play is stopped or the unit is
turned off.
The display "Cd-P" indicates that programming is retained in the
memory.