Connecting To An Amplifier - Panasonic Technics SL-G700 Manuel D'utilisation

Connections
Basic

Connecting to an amplifier

XLR cable
Analogue audio
cable (supplied)
Pre-amplifier with
unbalanced input
terminals
(AV receiver, control amplifier, etc.)
: We recommend using cables with a length of
*
3 m or less.
• For details, refer to the operating instructions of
the connected device.
• Do not use any other analogue audio cables
except the supplied one.
Connecting to a digital audio output
device
Optical digital
audio cable
(not supplied)
Digital audio output device
12
(12)
*
(not supplied)
Pre-amplifier with
balanced input
terminals
Amplifier
Coaxial digital
cable
(not supplied)
• Audio signal of Super Audio CD and Super
Audio CD layer of Hybrid Super Audio CD
cannot be output from the digital audio output
terminal of this unit. Connect the device to the
analogue audio output terminal.
• When enjoying video contents with this
function, the video and audio output may not
be synchronised.
• For details, refer to the operating instructions of
the connected device.
AC mains lead connection
Connect only after all other connections are
completed.
AC mains lead
To a household
mains socket
• Use only the supplied AC mains lead.
• Insert the plugs of the cables to be connected
all the way in.
• Do not bend cables at sharp angles.
• "Wi-Fi" function switching screen is displayed
following "Wi-Fi Setup" when this unit is turned
on. If you stop the Wi-Fi setting, set to "Off"
and press [OK]. To keep the Wi-Fi setting, start
the "Google Home" app and follow the on-
screen instructions. ( 13, 14)
Note
• This unit consumes a small amount of AC power
( 20) even when the unit is in standby mode.
Remove the plug from the main electrical outlet
if you will not be using the unit for an extended
period of time. Place the unit so the plug can be
easily removed.
(supplied)