Keyboard buttons
SET PRESET
SET PRESET
The
positions. To store a current position as preset position follow steps given below:
1. Step: Choose a speed dome camera in which you want to programm a preset position, e.g. camera 1:
0 0 1 ENTER
Key in:
The keyboards LCD displays:
2. Step: Use the joystick to move the camera to the desired position. Use the zoom and focus buttons to
individually setup the picture.
NOTE: It is not recommended to use the auto focus function in combination with preset positions
as the camera needs time to focus on the object. It is recommended to set the focus with the preset
position. Simply select and store the focus manually.
3. Step: Key in the number. This number will be stored with the selected preset position. To store the
number, e.g. number 1 and the selected position for this dome press the button
Please enter:
The keyboard's LCD displays:
SET PRESET
4. Step: Press
The keyboard's LCD displays:
NOTE: Each speed dome camera can store up to 128 preset positions. Repeat steps 1 to 4 to store
other positions. Preset positions cannot be individually erased. You have to select and store a
different position for the number to change the selection.
is used to setup individual selected pregrogrammed positions, so called preset
⎡
DEVICE
⎢
⎣
0 0 1 SET PRESET
⎡
SAVE
⎢
⎣
again.
⎡
SAVE
⎢
⎣
001
_ :
⎤
⎥
⎦
⎤
TO
PRESET
⎥
XXX
?
⎦
⎤
OK!
⎥
⎦
14
SET PRESET
.