Overview; Symbol Description - Security-Center EcoLine TV7090 Instructions D'installation

Overview

• Speedy response with 220times continuous auto-focus zoom lens and 10times Electronic Zoom
• Auto Iris and Manual Iris Control
• Advanced DSP Camera, including Auto White Balance, Backlight Compensation and Auto Iris
Control.
• 360° Continuous Pan Rotation.
• 128 Preset Points Setup.
• Continuous Auto Focus
• Variable Speed 1°~300°/Sec
• Horizontal Rotation of 180°.
• Built in 6 Alarm Inputs and one Relay Output
• Two types of Alarm out signal are provided: NO and NC.
• Remote Control via RS-485
• Connects up to 127 Speed Dome Cameras.
• Supports PELCO protocol (D and P protocol)
• PC Control is applicable after transformation using the Communication Interface has been
completed.
• 12VDC Power Input (AC100 240V, 50Hz or 60Hz)
Suitable for installation on different occasions; can be installed outside (with outdoor dome
•
housing), flush mount on a ceiling or in the ceiling with only the dome showing
• UVV certified

Symbol description

Function keys are shown by, framed capital boldface print letters.
Example: ENTER , AUTO FOCUS , etc.
Function key "+" indicates the order sequence.
Example: 2 8 + ENTER meaning, press the function key " 2 ", " 8 ", and then ENTER .
⎡
DEVICE 001 _ :
⎢
⎣
LCD display.
"n" indicates the ID number of the nth device (ID numbers ranges from 001~127).
⎤
; indicate messages from the device and is shown on the control keyboard
⎥
⎦
5
.