Terminal Foot Connection, Data Line And Signal Line Regulation - Security-Center EcoLine TV7090 Instructions D'installation

Terminal foot connection, data line and signal line regulation

Video output Alarm input/output
(1) Power 12VDC
(2) Video output
(3) Alarm input/
output
(4) RS-485 input /
output
(5) RJ-11 input/
output
10 ~1
Connect the plug of a 12VDC,1.5A power source.
Video signal output of VCBS 1.0Vp-p 75Ohms BNC.
The speed dome camera is equipped with 6 external alarm triggering inputs
and 2 sets of alarm outputs (1 set NO and 1 set NC). Refer to the pinouts:
PIN 1 Alarm input 1
PIN 3 Alarm input 3
PIN 5 Alarm input 5
PIN 7 Ground
PIN 9 Alarm output NC
Connect the communication control input and output terminal as follows:
PIN 1 Input data +
PIN 3 Ground
PIN 5 Output data -
Alternatively connect the RJ-11 communication control input and output as
follows:
PIN 1 Not used
PIN 3 Ground
PIN 5 Data -
PIN 2
PIN 4
PIN 6
PIN 8
PIN 10
PIN 2
PIN 4
PIN 2
PIN 4
PIN 6
9
Alarm input 2
Alarm input 4
Alarm input 6
Common
Alarm output NO
Input data -
Output data +
Not used
Data +
Not used