Télécharger Imprimer la page

ECOMAT 2000 CLASSIC PLUS Mode D'emploi page 23

Masquer les pouces Voir aussi pour CLASSIC PLUS:

Publicité

EN
Do not overload the mains socket by connecting too many devices to it.
Make sure that the fuse of the mains socket corresponds at least to the power/current
consumption set on the heater.
The mains plug is grounded. Therefore, make sure that the mains socket is properly grounded
before you connect the mains plug. Do not insert the plug into an outlet that is not grounded.
If the power cord of the device is damaged, it must be replaced with a special cord that is available
from the manufacturer or its customer service representative.
Contact an electrical specialist if you have any further questions.
Warning notice !
The ground pin or spring is for safety. Using an outlet that is not properly grounded can result in electric
shock and/or injury.
Disposal
The device, accessories and packaging should be disposed of in an environmentally friendly manner.
This product bears the disposal symbol for electronic waste. The following regulations, among others,
must be complied with during disposal:
The device must not be disposed of with household waste.
It must be returned to the separate return system. Raw material recovery instead of waste disposal.
According to EU directives (2012/19/EU), used electronic devices must be collected separately and
recycled in an environmentally friendly manner.
Dispose of the old device via an approved waste disposal company or via your municipal waste disposal
facility. Stick to the currently applicable regulations. If in doubt, contact your disposal facility or your
municipal administration.
ECOMAT2000 | 23

Publicité

loading

Ce manuel est également adapté pour:

Classic