Straight Stitch - Singer Featherweight Mode D'emploi

1
A B C D
F
E
G
H
J I
STRAIGHT STITCHES
A
Straight stitch is most frequently used for every aspect of sewing. Learn the correct method of your machine following the steps below.
1. SETTINGS 2. Pull both threads under the
Stitch indicator -
A
Stitch length - 2 - 3
Thread tension - 3
3. Place the fabric under the
Raise the take-up lever to its
highest position by turning the
hand wheel toward you.
4. Turn the hand wheel toward
A Take-up lever
B Top thread tension control
C Stitch width/needle
position control
D Indicator
E Stitch selector
F Hand wheel
G Stitch length control
H Power/light switch
I Reverse stitch lever
J Presser foot lever
18
5
2
4
3
5. a. Start to sew stepping on
presser foot toward the back
of the machine.
b. Guide the fabric gently
presser foot and lower the
c. When you reach the end
presser foot lever.
you until the needle enters the
fabric.
1 2
6
6. a. Turn the hand wheel to
the foot control. raise the needle.
b. Raise the presser foot by
with your hand. pushing the lever up.
c. Use the thread cutter
of the fabric, stop the above the presser foot to
machine by releasing the cut off excess threads.
foot control.
d. Pull both threads under
and to the back of the
presser foot, leaving 4
inches (10 cm) clear.
Needle position for straight
stitching
1 Straight stitch at left needle position
with needle position control at L.
2 Straight stitch at middle needle
position with needle position
control set at M.
3 Straight stitch at right needle
position with needle position
control at R.
3