Fuse Inspection; Pocket Tester - Yamaha Tt-R125S Manuel D'atelier Du Proprietaire

All manuals and user guides at all-guides.com
FUSE INSPECTION (TT-R125E/TT-R125LWE)
1
2
1
6. Install:
G
7. Check:
G
8. Lubricate:
G
9. Connect:
G
CAUTION:
First, connect the positive lead 1, then the
negative lead 2.
10. Install:
G

FUSE INSPECTION

(TT-R125E/TT-R125LWE)
CAUTION:
To avoid a short circuit, always set the
main switch to "OFF" when checking or
replacing a fuse.
1. Remove:
G
2. Check:
G
Checking steps:
Remove the fuse 1.
G
Connect the pocket tester to the fuse and
G
check the continuity.
NOTE:
Set the pocket tester selector to "Ω × 1".
2
If the pocket tester indicates "∞", replace
G
the fuse.
2 Reserve fuse
3 - 41
INSP
ADJ
Battery
Battery terminals
Dirt → Clean with a wire brush.
Loose connection → Connect properly.
Battery terminal
Recommended lubricant:
Lithium soap base grease
Battery leads
(to the battery terminals)
Battery cover
Battery cover
Continuity

Pocket tester:

YU-03112-C/90890-03112