Yakima ROC 4 Mode D'emploi page 3

ATTACH CRADLES AND STABILIZERS.
The cradle with reflecting Yakima logo should
go on last, with Yakima logo facing out.
POSITION END CRADLE.
Move outside
If you have
cradle and
purchased the
stabilizer forward
StrataLock,
until cradle rests
against stop-
install it here
button. (Stabilizer
and continue
arm slides over
at the next
stop-button).
step.
ATTACH WORLD STRAPS.
Attach two World Straps to each
cradle and one strap to each
stabilizer.
1032414B-3/15
Slide one stabilizer
1
arm onto mast and
Align notched
over stop-button.
openings as
shown.
2
Slide cradles between
stabilizer arms.
Push cradles onto mast
and over stop-button, by
FLEXING CRADLES
UPWARD.
SECURE CRADLES TO MAST.
Insert bolt and
washer (right to left)
into rounded
depression on
underside of cradle.
TIGHTEN EACH CRADLE
CAREFULLY.
The smooth
depression on
right front side
must face
TOWARD you.
3
Slide other
stabilizer bar
onto mast.
Attach nut.
Use a flathead screwdriver.