VEVOR XC9192 Mode D'emploi page 5

6 M10 bolt
M30 nut and
7
inner sleeve
OPERATION
THE CRANKCASE SEPARATOR USE METHOD
Step1: Place the
crankcase on the table,
disassembly side up.
Step3: Turn the screw counterclockwise with the wrench, and the crankcase will
slowly separate.
Step2: Fix the Crankcase Separator bracket
above the crankcase as shown in the figure. Align
the center screw with the shaft and adjust the
mounting position of the screw to the best state.
4
2 /
1 /