Publicité
Les langues disponibles
Les langues disponibles
V. Clean the grinder
The grinder may be influenced by coffee beans and some other factors during
operation to make the powder outlet channel be blocked. Please clean the powder
outlet channel in time when the following conditions occur:
1. Clean the powder outlet and grinder at least once every two weeks.
2. When there's reduction in powder amount, please clean the powder passage
and grinding wheel.
3. When the coffee grinder is used to grind fine coffee powder, please clean the
powder channel in time.
4. The machine is equipped with an anti-static system which could prevent coffee
powder from spreading outside in grinding. When coffee powder floats out from
funnel, please use the cleaning brush to clean the the powder entrance area in
time.
VI. Clean the grinder
NOTE: When cleaning the grinder, please make sure there are no beans in bean
box, and when the GRIND button "
" is pressed, the grinder can work properly
and no coffee powder flows out from powder outlet.
1. Rotate the bean box counterclockwise to remove the bean box.
2. Turn the internal grinding wheel counterclockwise and take it out. Use the
attached cleaning brush to clean the grinding wheel and remove the coffee powder
in the gears. Please note that the grinding wheel cannot be directly rinsed with
water.
3. Use the attached cleaning brush to clean the grinding chamber and the powder
channel.
4. Do not install the grinding wheel at this time, re-install the empty bean box,
press the GRIND button "
", let the grinder run to sweep out the powder residue
in the grinding chamber. (If powder inside is not removed completely, please
repeat step 3 and 4)
5. Remove the bean box counterclockwise and install the grinding wheel well in
position. Cleaning is completed.
- 19 -
Publicité
