VEVOR CM5020B-UL Mode D'emploi page 10

machine enters into the preheating mode. And the machine will enter into the
standby mode after finish preheating.
5. Turn the knob to hot water position , after a while, hot water will flow out from
steam tube. Align the steam tube to drip tray or use a cup to collect the hot water.
6. Press " " or " " to clean the pipes in machine, hot water will come out
from funnel. Use the drip tray or use a cup to collect the hot water.
NOTE: Do not extend any parts of your body closed to funnel and steam tube to
avoid scalding during brewing hot water.
7. After water stops flowing, pour away the water in drip tray or in the cup.
8. Thoroughly clean the detachable parts of the whole machine with warm water.
NOTE: There may be noise when pumping water for the first time, it is normal.
Choose the right coffee powder
Coffee powder
The coffee should be freshly ground and subjected to deep roasting. You may
need to use French or espresso roasted coffee powder for espresso coffee.
Pre-ground coffee powder can only keep the aroma for 7 to 8 days unless it is
stored in a sealed container, and place it in a cool place. Do not store coffee in the
refrigerator or freezer. In general, it is not recommended to use pre-ground coffee
powder. The coffee beans freshly ground are more easily to retain the aroma of the
coffee and obtain higher coffee quality.
Grind
If you are making coffee, this step is a key step in the espresso making process
and requires more practice.
• The correct powder should look like salt.
• If the powder is too finely ground, it may cause the coffee to flow intermittently or
fail to brew coffee.
• If the powder is too coarse, the water will flow through the coffee too quickly,
which will affect aroma and taste of the extracted coffee
- 9 -