VEVOR CM5020B-UL Mode D'emploi page 12

Brew a single-cup of coffee:
In the standby mode, install the single-cup
filter into the funnel, load about 13 grams of coffee powder, use the coffee tamper
and press the coffee powder with a force of about 12.5Kg, then align the funnel to
the funnel bracket, turn the funnel counterclockwise to lock it. Put a coffee cup on
the drip plate, press SINGLE button, the machine starts to brew a single-cup of
coffee. When the set coffee dose is reached (about 30ML), the machine will stop
working automatically and enter into the standby mode.
Brew a double-cup of coffee:
In the standby mode, install the double-cup
filter into the funnel, load about 18 grams of coffee powder, use the coffee tamper
and press the coffee powder with a force of about 12.5Kg, then align the funnel to
the funnel bracket, turn the funnel counterclockwise to lock it. Put a coffee cup on
the drip plate, press DOUBLE button, the machine starts to brew a single-cup of
coffee. When the set coffee dose is reached (about 60ML), the machine will stop
working automatically and enter into the standby mode.
Customized setting:
1. Coffee dose of Single-cup and double-cup, you can adjust the specific coffee
dose according to your needs, operation is as follows:
Keep pressing the single-cup button or double-cup button, single-cup indicator
" " or double-cup indicator " " flash, and coffee starts to flow out. When
coffee dose reaches the desired amount, release the single-cup button or
double-cup button, the buzzer sounds, and the machine will record the coffee dose.
When you brew coffee next time, the machine will brew the coffee amount as per
your setting ( adjustable coffee amount ranges between 20ml-400ml.).
2. Hold and press " ", " " and " " will restore coffee dose of single and
double-cup to factory settings.
When extracting coffee, make sure that the funnel is turned counterclockwise into
the correct position as shown in the Figure below.
- 11 -