Publicité
Les langues disponibles
Les langues disponibles
3. When the grinder works continuously for 3 minutes and the intermediate rest
time is less than 6 minutes, the machine will limit the use of grinding function. After
the rest time reaches 6 minutes, the machine will automatically release the
limitation and the grinder can resume to work again.
4. When the grinder is limited to use, press the GRIND button "
", the buzzer
will sound three times, and the indicator of Grind button will flash.
Grinding time adjustment: You can set the grinding time as per your need. Keep
pressing the GRIND button "
", the indicator of Grind button will flash quickly and
the grinder will start working. When it runs to the time you want, release the the
GRIND button "
", the buzzer will sound, the machine will record the time. Next
time you grind, the grinder will run for the set time. The machine could only record
the grinding time over 6 seconds. If the grinding time is less than 6 seconds, the
machine cannot record it.
NOTE: Hold and press "
" and "
" buttons at the same time, you can restore
the grinder to factory setting.
III. Restore to factory settings
In the case of wrong settings, the user can press and hold the four buttons of
POWER, GRIND, SINGLE and DOUBLE at the same time.The machine will beep
and all the indicators will flash together 3 times. Then the machine will return to the
factory settings.
IV. Tool box and cleaning accessories
The machine is equipped with a tool box which is used for storing cleaning pin and
cleaning brush. Single-cup filter and double-cup filter can be stored in the tool box
as well. The tool box is placed at the left lower part of appliance, where you can
pull it out when you remove drip tray from the machine (Fig. 6).
- 16 -
Publicité
