Power Supply - Panasonic CS-XE12SKUA-1 Instructions D'utilisation

Power supply

Do not use a modified
cord, joint cord, extension
cord or unspecified cord
to prevent overheating
and fire.
To prevent overheating, fire or electric
shock:
• Do not share the same power outlet with
other equipment.
• Do not operate with wet hands.
• Do not over bend the power supply
cord.
If the supply cord is damaged, it must be
replaced by the manufacturer, service
agent or similarly qualified persons in
order to avoid a hazard.
It is strongly recommended to install
this unit using an Earth Leakage Circuit
Breaker (ELCB) or Ground Fault Interrupt
(GFCI) or Appliance Leakage Current
Interrupt (ALCI) to prevent electric shock
or fire.
Stop using the product if any abnormality/
failure occurs or turn off the power switch
and breaker.
(Risk of smoke/fire/electric shock)
Examples of abnormality/failure
• The ELCB or GFCI or ALCI trip
frequently.
• Burning smell is observed.
• Abnormal noise or vibration of the unit
is observed.
• Water leaks from the indoor unit.
• Power cord becomes abnormally hot.
• Fan speed cannot be controlled.
• The unit stops running immediately
even if it is switched on for operation.
• The fan does not stop even if the
operation is stopped.
Contact your local dealer immediately for
maintenance/repair.
This equipment must be earthed to
prevent electrical shock or fire.
Prevent electric shock by switching off
the power supply:
- Before cleaning or servicing,
- When extended non-use, or
- During abnormally strong lightning
activity.
CAUTION
Indoor unit and outdoor unit
Do not wash the indoor unit with water,
benzene, thinner or scouring powder to
avoid damage or corrosion at the unit.
Do not use for preservation of precise
equipment, food, animals, plants, artwork
or other objects. This may cause quality
deterioration, etc.
Do not use any combustible equipment
in front of the airflow outlet to avoid fire
propagation.
Do not expose plants or pet directly to
airflow to avoid injury, etc.
Do not touch the sharp
aluminium fin, sharp parts may
cause injury.
Do not switch ON the indoor unit when
waxing the floor. After waxing, aerate the
room properly before operating the unit.
Do not install the unit in oily and smoky
areas to prevent damage to the unit.
Do not dismantle the unit for cleaning
purpose to avoid injury.
Do not step onto an unstable bench
when cleaning the unit to avoid injury.
Do not place a vase or water container
on the unit. Water may enter the unit and
degrade the insulation. This may cause
an electric shock.
Do not open window or door for long time
during operation, it may lead to inefficient
power usage and uncomfortable
temperature changes.
Prevent water leakage by ensuring
drainage pipe is:
- Connected properly,
- Kept clear of gutters and containers, or
- Not immersed in water
After a long period of use or use with any
combustible equipment, aerate the room
regularly.
After a long period of use, make sure the
installation rack does not deteriorate to
prevent the unit from falling down.
Remote control
Do not use rechargeable (Ni-Cd)
batteries. It may damage the remote
control.
To prevent malfunction or damage of the
remote control:
• Remove the batteries if the unit is not
going to be used for a long period of
time.
• New batteries of the same type must be
inserted following the polarity stated.
5