AEG NBB8S731AT Notice D'utilisation page 23

Code and description
F102 - the door is not fully closed or the door lock is
1)
broken.
F111 - Food Sensor is not correctly inserted into the
socket.
F240, F239 - the touch fields on the display do not
work properly.
F908 - the appliance system cannot connect with the
control panel.
F602, F603 - Wi-Fi is not available.
1)
When the following error message continues to appear on the display, it means a faulty subsystem may have
been disabled. In such a case contact your dealer or an Authorized Service Centre.
2)
If one of these errors occurs, the rest of the appliance functions will continue to work as usual.
12.3 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is located
on the front frame of the appliance. It is
visible when you open the door. Do not
remove the rating plate from the appliance.
13. ENERGY EFFICIENCY
13.1 Product Information Sheet and Product Information according to EU
Energy Labelling and Ecodesign Regulations
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conventional mode
Energy consumption with a standard load, fan-forced mode
Number of cavities
Heat source
Volume
Type of oven
Remedy
Close the door.
Turn the appliance off and on.
Fully plug Food Sensor into the socket.
Clean the surface of the display. Make sure there is no
dirt on the touch fields.
Turn the appliance off and on.
1)2)
Turn the appliance off and on.
We recommend that you write the data
here:
Model (MOD.) :
Product number (PNC):
Serial number (S.N.):
AEG
NBB8S731AT 944035060
TB8SB73ZAB 944035048
61.9
A++
1.09 kWh/cycle
0.52 kWh/cycle
1
Electricity
70 l
Built-In Oven
ENGLISH 23