AEG NBB8S731AT Notice D'utilisation page 20

3. The signal sounds when the cleaning
ends.
4. Leave the appliance door open and wait
until the interior is dry.
When this function works, the lamp is off.
11.4 Cleaning Reminder
When the reminder appears, cleaning is
recommended.
Use the function: Steam Cleaning Plus.
11.5 Descaling
This programme removes and prevents
limescale buildup in the steam system. It
ensures the proper functioning of the steam
functions and enhances the water quality in
your appliance.
1. Press: Maintenance / Descaling.
2. Press and follow the instruction
on the display.
Before you remove the accessories,
make sure the appliance is cold.
3. When the function ends, turn off the
appliance and wait until it is cold.
4. Leave the appliance door open and wait
until the interior is dry.
When this function works, the lamp is off.
11.6 Descaling reminder
The appliance provides two reminders for
descaling. The descaling reminder cannot be
deactivated.
• Soft reminder - recommends you to
descale the appliance.
• Hard reminder - obligates you to descale
the appliance. If you do not descale the
appliance when the hard reminder is on,
the steam functions are disabled.
11.7 Rinsing
Use it to clean the steam system after
frequent use of the steam functions.
1. Press: Maintenance / Rinsing.
2. Press and follow the instruction
on the display.
20 ENGLISH
Before you remove the accessories,
make sure the appliance is cold.
3. The signal sounds when the procedure
ends.
4. Leave the appliance door open and wait
until the interior is dry.
When this function works, the lamp is off.
11.8 Drying
Use it after cooking with a steam heating
function or steam cleaning to dry the cavity.
1. Press: Maintenance / Drying.
2. Press and follow the instruction
on the display.
Before you remove the accessories,
make sure the appliance is cold.
3. The signal sounds when the drying ends.
When this function works, the lamp is off.
11.9 Drying reminder
After cooking with a steam heating function
the display prompts to dry the appliance.
Press YES to dry the appliance.
11.10 Tank emptying
Use it after cooking with steam heating
function to remove the residual water from
the water tank.
1. Press: Maintenance / Tank emptying.
2. Press and follow the instruction
on the display.
Before you remove the accessories,
make sure the appliance is cold.
3. The signal sounds when the procedure
ends.
When this function works, the lamp is off.
11.11 Removing and installing door
You can remove the door and the internal
glass panels to clean it. The number of glass
panels is different for different models.