Emglo K15A-8P Guide D'utilisation page 24

CODE POSSIBLE CAUSE
36 Fuse blown, circuit breaker tripped
POSSIBLE SOLUTION
1. Check fuse box for blown fuse and replace as necessary.
Reset circuit breaker. Do not use a fuse or circuit breaker
with higher rating than that specified for your particular
branch circuit.
2. Check for proper fuse. You should use a time delay
fuse.
3. Check for low voltage conditions and/or proper extension
cord.
4. Disconnect the other electrical appliances from circuit or
operate the compressor on its own branch circuit.
24