Yakima LowRider MAX Mode D'emploi

A SET OF MAX CLAWS ARE REQUIRED FOR INSTALLATION.
Claws purchased separately and are specific to
your vehicle make and model.
MAX TOWER
4X
END CAP
4X
BARREL NUT
4X
WEDGE
4X
1033347A-1/15
LowRider MAX
— MAX CLAW
(Claws are not
included, and may
look different.)
SKEWER BOLT
(lever)
4X
(4X)
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL
YAKIMA RACKS AND
ACCESSORIES BE PROPERLY
AND SECURELY ATTACHED
TO YOUR VEHICLE.
IMPROPER ATTACHMENT
COULD RESULT IN AN
AUTOMOBILE ACCIDENT,
AND COULD CAUSE
SERIOUS BODILY INJURY OR
DEATH TO YOU OR TO
OTHERS. YOU ARE
RESPONSIBLE FOR
SECURING THE RACKS AND
ACCESSORIES TO YOUR
CAR, CHECKING THE
ATTACHMENTS PRIOR TO
USE, AND PERIODICALLY
INSPECTING THE PRODUCTS
FOR ADJUSTMENT, WEAR,
AND DAMAGE. THEREFORE,
YOU MUST READ AND
UNDERSTAND ALL OF THE
INSTRUCTIONS AND
CAUTIONS SUPPLIED WITH
YOUR YAKIMA PRODUCT
PRIOR TO INSTALLATION OR
USE. IF YOU DO NOT
UNDERSTAND ALL OF THE
INSTRUCTIONS AND
CAUTIONS, OR IF YOU HAVE
NO MECHANICAL
EXPERIENCE AND ARE NOT
THOROUGHLY FAMILIAR
WITH THE INSTALLATION
PROCEDURES, YOU SHOULD
HAVE THE PRODUCT
INSTALLED BY A
PROFESSIONAL INSTALLER
SUCH AS A QUALIFIED
GARAGE OR AUTO BODY
SHOP.
Part #1033347 Rev.A