Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
14
Reattaching the network adaptor to the console
Caution
• For safety reasons, do not connect the power plug
for the console to an electrical outlet until the
network adaptor has been reattached.
• When installing an authorized internal peripheral
in the console's expansion bay, refer to the
instructions supplied with the peripheral product.
1
Place the network adaptor over
the expansion bay so that the
mounting screws line up with the
holes in the console.
PlayStation
EXPANSION BAY
console rear
Network adaptor
2
Fasten the network adaptor to
the PlayStation
2 console.
®
Turn the mounting screws in a
clockwise direction using a coin. Do
not overtighten.
Notes
• Do not use a screwdriver to tighten the
mounting screws.
• Do not fasten the mounting screws too
tightly, as this may damage the screws
or console.
2
®
Mounting screw
Using the main menu
When you turn on the console for the first time
you will be prompted to adjust basic language
and time settings. These settings can be
changed later through the System
Configuration menu. For details, see "Using the
System Configuration menu" (pages 14-15).
After setup, the main menu is displayed
whenever you turn on the console without a
disc inserted.
You can move to the Browser screen or the
System Configuration menu from the main
menu.
Using the Browser screen
You can do the following operations using the
Browser screen:
• Check/copy/delete game data on the
memory card (8MB) (for PlayStation
2) or
®
memory card
• Start PlayStation
or PlayStation
2 format
®
®
software
• Play an audio CD
• Play a DVD video
Select "Browser" using the directional buttons
and press the ✕ button.
The Browser screen is displayed. The memory
card (8MB) (for PlayStation
2), memory card or
®
disc inserted in the console are displayed as
icons.
Checking/copying/deleting data
You can copy data from one memory card (8MB)
(for PlayStation
2) or memory card to another or
®
delete data you no longer wish to keep.
You cannot, however, copy data of the
PlayStation
2 format software to an
®
SCPH-1020 U memory card.
Insert the memory card (8MB) (for
PlayStation
2) or memory card in advance.
®
1
Select the icon of the memory
card (8MB) (for PlayStation
2) or
®
memory card where the data you
want to check/copy/delete is
saved, and then press the ✕
button.
2
Check/copy/delete data
according to the instructions on
the screen.
Note
While copying or deleting data, do not remove the
memory card (8MB) (for PlayStation
2) or memory card.
®
Using the System Configuration
menu
Using the System Configuration menu, you can
change or update your system settings for the
PlayStation
2 console.
®
Changes to these settings are saved and remain
in effect even after you turn off the console.
The default settings are underlined.
1
Select "System Configuration"
using the directional buttons and
press the ✕ button.
The System Configuration menu is
displayed.
2
Select the item you want using
the directional buttons and press
the ✕ button.
x Clock Adjustment
Sets the clock.
1
Use the directional buttons to set
the month and then press the
right directional button.
Use the same method to set the day,
year, hour, minute and second. To
return to the previous menu, press the
left directional button.
2
Press the ✕ button to start the
clock.
Publicité
Table des Matières
