Sony SCPH-50001/N Mode D'emploi page 12

12
Connecting other digital equipment
Connecting a device using the
Universal Serial Bus (USB)
interface
The two USB connectors on the front of the
console can be used to connect USB-compatible
devices. Also refer to the instructions supplied
with the device to be connected.
USB connectors
Note
Not all USB-compatible products work with the
PlayStation 2 console. See the appropriate USB-
®
compatible product's user manual for more information.
Connecting the network adaptor to a phone line
You can connect to a network through a telephone line by inserting a telephone cord into the LINE
connector on the network adaptor installed in the PlayStation
LINE connector
Telephone cord
1
Insert a telephone cord (not
included) into the LINE connector
of the network adaptor.
2
Plug the telephone cord into a
telephone wall jack.
Warning
Do not connect a cord other than a home-use phone
cord to the line connector. If you connect the wrong
type of cord, too much electrical current may pass
through the connector, causing a malfunction, excessive
heat or fire in the connector. Never connect phone
cords of the following types to the line connector:
• An ISDN (digital) compatible public phone
• A PBX phone
• A cellular phone or car phone
• A home or business telephone network phone
Caution
• When you connect to a network you may be charged a
connection fee by the local telephone company and a
usage fee by the Internet service provider. For details,
contact your local telephone company or Internet
service provider.
• The buzzer port located on the front of the network
adaptor is a speaker for the modem, not a reset switch.
Do not insert any foreign objects into this port as you
may damage the buzzer.
2 console.
®
Telephone
wall jack
Notes
• The network adaptor can be connected to telephone
cords with standard RJ-11C telephone connectors. In
some cases you may need to use an adaptor to connect
to your phone line. For details, contact your local
telephone company.
• If you have call waiting, you may be disconnected or
the software may function abnormally if a call is
received while you are connected to a network. You can
disable call waiting by editing your network settings
using the network adaptor start-up disc.
• When a fax machine or a telephone is in use on the
same line, you will not be able to connect to a network
using the line connector. Also, when the network
adaptor is connected to a network, you will not be able
to use your phone or fax machine.