Commissioning And Operation - ITW Simco-Ion Cleanflex Easy Notice D'utilisation

6 Commissioning and operation

- Supply 24 Volt power supply and compressed air to the gun. Before first use, it is advisable
to set the compressed air to, for example, 2 Bar;
- The LED indicator on the gun blinks green rapidly during start-up. The gun is ready for use
after approx. 5 seconds; the LED indicator slowly flashes green 1x per 3 seconds (still alive)
- Take the gun in your hand and point it at the object to be cleaned while the trigger is
pressed. The LED indicator now lights up green continuously;
The ionized air stream cleans and discharges the object within 1 second;
- The ionization is only active when the trigger of the Cleanflex is pressed.
- Release the trigger once the entire object or surface has been cleaned and discharged.
- Adjust the rotatable gun head to one of the four desired positions by moving it with moderate
force by hand.
- The Cleanflex can be used in several ways:
- Pull down
The Cleanflex can be mounted hanging from a balancer upside down at a work station.
The Cleanflex can be hung with the supplied snap hook on the metal ring of the
Cleanflex.
- Hand cleaner
The Cleanflex can be used as a conventional hand air gun. The Cleanflex can be hung
on its metal ring.
Figure 6: positions in which the Cleanflex can be used
CleanflexEasy_UM_9752050810_NL_D_GB_F_V1_2
Head
Ionised air
output
LED indicator
Trigger
GB
37