Introduction - ITW Simco-Ion Cleanflex Easy Notice D'utilisation

1 Introduction

The Cleanflex Easy ionization gun is a compressed air gun designed to clean electrostatically
charged surfaces or parts. The gun produces a flow of air rich in positive and negative ions.
When directing this air flow to an electrostatically charged surface, an exchange of electrons
takes place, so that the surface is neutralized during blowing clean. This prevents the particles
being blown off again
The gun operates on 24 V. The high voltage required for ionization is generated internally. The
high voltage is present only when the gun trigger is pressed and compressed air is present in
the gun. This prevents wear on the high voltage emitters, which drastically extends the gun life.
Due to the ergonomic shape of the handle, the Cleanflex Easy fits comfortably in the hand and
the gun is easy to operate with the integrated trigger.
The unique design of the gun's discharge nozzle ensures that the amount of blown air is approx.
3 times greater than the amount of compressed air used. It also ensures a very low noise
emission during the operation of the gun.
Thanks to the revolving head the Cleanflex Easy can be used as a "pull down" gun for use with
a balancer above a workstation or as a traditional hand gun.
Outlet nozzle
LED-indicator
Revolving
Head
Hand
Grip
Compressed air
M12 power connection connection
Trigger
Figure 1: Cleanflex Easy
GB
CleanflexEasy_UM_9752050810_NL_D_GB_F_V1_2 30