Installation; Control; General - ITW Simco-Ion Cleanflex Easy Notice D'utilisation

5 Installation

- Disconnect the power supply before carrying out any work on the unit.
- The electrical installation must be carried out by an electrical engineer with the relevant
training and qualifications.
- The Cleanflex Easy may only be used indoors and only for light industrial applications.
- Refer to the manual for the correct power supply to be used for correct and safe gun
connection.
- The power supply for the Cleanflex Easy must be properly grounded. Grounding is
necessary for proper operation of the equipment and prevents electric shock when touched.
- The Cleanflex Easy must be powered only by a Limited Power Source (LPS) or NEC Class 2
power supply. An LPS certified power supply has a limited output power so that it always
continues to generate a safe output voltage.
The 0 Volt of the power supply output must be properly grounded
(see paragraph 5.4).
The Cleanflex Easy can be powered by an existing available 24 Volt DC power supply at the
workplace (which meets the above requirements), but also by a SIMCO (Netherlands) B.V.
supplied desktop power supply (see accessories).

5.1 Control

- Check that the equipment has been received undamaged and is the correct version.
- Check that any necessary accessories have also been included.
- Check that the packing slip data matches the data of the received product.
In case of problems and / or questions, please contact Simco Ion or
a Simco Ion representative in your region.

5.2 General

Determine the optimal location where the gun with the power supply and the compressed air
hose will be used.
The compressed air hose and the power cable can be tied together with suitable materials.
Use a standard Simco Ion Device cable for the power cable (see accessories) or make your
own connection cable with an M12 connector (see section 5.4)
As a replacement for a compressed air hose and a separate power cable, the optional spiral
hose with built-in power cable can be used (see accessories).
The supplied snap hook can be used in order to use the gun as a "pull down" application.
Note that the blow-off force is reduced to 80% when using the spiral hose.
CleanflexEasy_UM_9752050810_NL_D_GB_F_V1_2
GB
35