Table des Matières
Publicité
28
GERÄTEEINSTELLUNGEN
3.10
SETTING..this menu allows the user to adjust key operation settings for
this fixture.
Select UPLOAD to upload the custom programs from the current MAS-
TER unit to the SLAVE units.
In order to reset custom modes to default values select RESET
NOTE: UC\RGBW\CALIB.C can´t reset
COLOR is for activate/unactivate the color calibration functions. When
RGBW is selected, on RGB = 255,255,255, the color is displayed as
calibrated in CALIB.C -- RGBW. When COLOR is set OFF, on RGB =
255,255,255, the RGBvalues are not adjusted and the output is most
powerful. When UC is selected, the RGB output are adjusted to a standard
preset universal color which balances fixtures from different generations.
NOTE: COLOR work only when choose NORMAL at FULL POWER CCT
Select DIM1, DIM2, DIM3 or DIM4 for different dimming speeds. (DIM4 is
the slowest dimming speed).
DMX ERROR Choose SAVE in order to save the last DMX data incase
of DMX signal error. Choose BLACK in order to blackout in case of DMX
signal error.
PWM_RATE is PWM reflesh rate bottom, press UP/DOWN to choose 600
HZ; 1200 HZ; 2000 HZ; 4000 HZ; 25000 HZ
NOTE: with reflesh rate increased, gray rate of dimmer will be reduced,
(that's means high reflesh rate, low gray rate), when it's <4000Hz>,CV3
is invalid, when it's 25000 HZ, CV1, CV2, CV3 are invalid, so please lower
PWM rate to increase gray rate in necessary.
FULL POWER CCT is the color temperature choose bottom, press UP/
DOWN to choose, under full power, 3200 K; 4200 K; 5600 K can be
chosen, when choose COLOR, 3200 K; 4200K; 5600 K are not work, but
choose NORMAL.
MENU
SETTING
****
UPLOAD
RESET
COLOR
DIMMER
DMX ERROR
PVM
FULL POWER CCT
SEND
****
RESET
****
OFF
RGB
UC
OFF
DIM 1
DIM 2
DIM 3
DIM 4
SAVE
BLACK
600 HZ
1200 HZ
2000 HZ
2400 HZ
6000 HZ
25000 HZ
3200 K
4200 K
5600 K
NORMAL
Publicité
Table des Matières
