Publicité
Les langues disponibles
Les langues disponibles
GB
Repeat this operation using up all the water in the tank.
This activates the resins for reducing the limestone in the water.
If the water collected is not clear but a yellowish colour, fill the tank and repeat the
operation.
Remember to connect, first, the feeder to the machine, then the feeder must
be placed into the wall socket, then you turn it on. To move the machine,
you have to turn the switch to the position "0", after you have to disconnect
the wall socket and finally you have to separate the feeder from the machine.
The "Espresso Point" machine could be equipped with a lime filter.
If it is present, proceed like it follows:
Specifications for use
The machine described in this manual is designed for insertion of a lime filter in a
support counter-tank.
Main information for safety
Insert the reserve tank and/or lime filter with the machine turned off and disconnected
from the power supply.
Activation
1) Open the bag containing the lime filter.
2) Place the filter in water and keep it there for at least twenty minutes.
Installation
After placing the machine on a level surface and before pouring water into the system
1) Extract the counter tank from the tank itself.
2) Put the filter on the inside, and push the upper extremity till the complete joint in the
seat on the hole.
3) Insert the counter tank with filter into the tank.
4) Pour water into the counter tank until it is full.
Warning
The anti limestone filter catches all the calcium ions in the water, so that its efficacy is
limited in time and strongly affected by the hardness of water to be used. Replace the fil-
ter after 600-800 uses.
All manuals and user guides at all-guides.com
CAUTION
ARRANGEMENT OF LIME FILTER
6
Publicité
