GB
The lid keys should be consigned to the person responsible for ordinary maintenance
and cleaning. If necessary, the tank can be washed in a dish-washer or rinsed out under
running water, while the tank compartment can be cleaned using a dry cloth wrapped
round the cleaning-rod for the surfaces and using only the type B cleaning-rod for less
accessible parts.
To clean the float pull the upper part till it comes off: it is only fitted on (fig. 14).
Then clean the interior using the type B cleaning-rod (fig. 15).
Finally, rinse using lukewarm water.
When reassembling the float the positions indicated in figures 16 and 17 should be
respected.
We recommend replacing cleaning-rods after they have been used
for approximately one year, or when they have visibly deteriorated.
All manuals and user guides at all-guides.com
Fig. 14
Fig. 16
In addition, after cleaning the appliance always
remember to recover the white pod.
CAUTION
12
Fig. 15
Fig. 17