Publicité
Les langues disponibles
Les langues disponibles
GB
Unplug the machine when cleaning it.
Do not immerse the device in water
UNDER NO CIRCUMSTANCES use abrasive materials.
To clean the pod entry compartment carry out the following procedure:
- Pull back the lever and fully insert the key (A) into the pod compartment (fig. 8),
ensuring the side bearing the letter A is uppermost.
- Dip the type C cleaning-rod in lukewarm water, then insert it and extract it from the
sliding base at least ten times (fig. 9)
During the operation rinse the cleaning-rod repeatedly.
To clean the nozzle use the type B cleaning-rod dipped in lukewarm water.
Remove any coffee crusts by inserting the cleaning-rod as shown in figure 10.
-
Repeat the movement at least 10 times, completely extracting the cleaning-rod from the
orifice each time.
Do not put your fingers or any other object that is not supplied
To clean the cup compartment use a soft sponge dipped in lukewarm water (not supplied
with the appliance) or the type C cleaning-rod, wet. If necessary use dish-washing
detergent that complies with directive CFR21, part 187.1010. Cleaning is recommended
every time it appears necessary and certainly at least once a day.
All manuals and user guides at all-guides.com
CLEANING - Daily cleaning of the machine
CAUTION
to clean it, even partially.
Fig. 8
CAUTION
with the appliance in the pod compartment.
Fig. 9
10
Fig. 10
Publicité
