dirna Bergstrom Bycool compact 1.4 Instructions De Montage page 20

COMPACT 1.4
EN
Air conditioning for vehicles
5a In the case of XLX cabin with spoiler TGX model
5a
only, attach EPDM 30x25 seal on the opposite
side to the other models, as indicated.
575
245
Leave the boreholes
Positioning the rear part of the unit
free
position on the edge
575
245
6 Position the equipment on the hatch plate,
introducing studs in the slider boreholes of the
plate.
CAUTION! When positioning the unit above
the hatch gap, check that the wastewater
run-offs are not blocked by the EPDM seal.
6
6
20