Adjusting The Printouts - Sony Up-D70A Mode D'emploi

Adjusting the Printouts

You can adjust the picture quality of a printout with the MENU button before
printing. The most recent setting remains effective until changed.
1
2
3
Press the MENU button.
Display the COLOR ADJUST menu by pressing the ◊ or √ button.
The first item of the printout adjust menu (for RED) appears in the printer
window display. The default or preset level is shown both as a value and
graphically.
RED :
_ _ _ _ _ _ _ _ _ _ _ _ _ _
Perform ajdustment.
1 Select the item for adjustment by using the ◊ or √ button.
√ : Scrolls up to the next item.
◊ : Scrolls down to the previous item.
2 Adjust the level by pressing the ı or ∫ button.
You can adjust the level for RED, GREEN and BLUE of the color, DARK
and LIGHT of the tone and GAMMA of the half tone between –32 to +32.
The center of the graph and the value 0 is the standard level.
∫ Increases the level.
ı : Decreases the level.
The sharpness can be adjusted among 4 levels: NONE /LOW/MIDDLE/
HIGH.
The LAMINATION can be adjusted among 5 kinds of the lamination types:
OFF/Glossy/NonGlare/Texture/Matte.
1, 4 2, 3
0
Default level (or preset level)
(Continued)
23
Operation