Publicité
rocks, broken glass, nails, wire, or string that can be thrown or become entangled in the cutting attachment.
Check that you have eye protection, proper clothing and balanced footing. There still may be risk to bystanders
from thrown objects. Bystanders should be encouraged to wear eye protection. If they are approached, stop the
motor and cutting attachment immediately.
Before each use check for damaged/worn parts
Check the trimmer head, guard, and loop handle and replace any parts that are cracked, warped, bent,
or damaged in any away.
The line-cutting blade on the edge of the guard can dull over time. It is recommended that you periodically
sharpen it with a file or replace it with a new blade.
WARNING:
Always wear gloves when mounting or replacing the guard or when sharpening or
replacing the blade. Note the location of the blade on the guard and protect your hand from injury.
Clean the trimmer after each use
See the maintenance section for cleaning instruction.
WARNING:
Never use water for cleaning your trimmer. Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to damage from various types of commercial solvents. Use clean
clothes to remove dirt, dust, oil, grease, etc.
STARTING/STOPPING THE BRUSH CUTTER & GRASS TRIMMER
To Start
1. Press the power button "
2. Move the lock-off trigger forwards and then press the main trigger. The tool will start working.
the gear shift button on MCDU to change the gear shift to adjust cutting speed of the tool, 1P is the lowest gear,
3P is the highest gear
(Fig. 18).
Fig.18
To stop
1. Move the tool away from the cutting area and release the main trigger to stop the tool.
2. Press the power button on MCDU to shut down the tool to avoid accidental starting.
WARNING:
Always remove the battery from the tool during work breaks and after finishing work.
WARNING:
Make sure that the display screen is OFF before next use to avoid serious personal
injury.
" on Multi Control Display Unit to light the screen.
I
14
Press
Publicité
