Publicité
◾
Do not let familiarity gained from frequent use of tools allow you to become
complacent and ignore tool safety principles. A careless action can cause severe injury within a
fraction of a second.
POWER TOOL USE AND CARE
◾ Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was designed.
◾ Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
◾ Remove the battery pack, if detachable, from the power tool and/or activate
any battery disabling device before clearing jammed material, making any adjustments, changing
accessories, cleaning, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
◾ Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
◾ Maintain power tools and accessories. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools and accessories.
◾ Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cut ting edges are less likely to bind and are easier to control.
◾ Use the power tool, accessories, tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous situation.
◾ Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces may lead to unsafe handling and/or loss of control of the tool.
Keep cables away from the working area of the tool.
◾
During operation cables may be hidden from view and can be accidentally damaged by the tool.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the manufacturer.
◾
A charger that is suitable for one type of battery pack may create a risk of fire when used with another
battery pack. Use only with the battery packs and chargers listed below.
BATTERY PACK
BP7615 / BP1560HPE
BP7625/ BP2560HPE
LBC60140/ BA460
LBC60280/ BA860
Use power tools only with specifically designated battery packs.
◾
Use of any other battery packs may create a risk of injury and fire.
CHARGER
CG768E/ CHBP60
CGB6055/ CHBA5560 (use with adapter AD7625/ADB60)
CGB6055/ CHBA5560
CG768E/
CHBP60(Use with single battery harness AH7608/
HPBA60PI)
5
Publicité
