Thrustmaster 599XX EVO 30 Manuel D'utilisateur page 3

Once you have installed the wheel, rotate it 180° (when facing the wheel, the Thrustmaster logo should
be upside down) to access the small attachment screw located on the ring of the Thrustmaster Quick
Release device. Use a large Phillips screwdriver to tighten the small attachment screw (do not use
excessive force), turning it clockwise.
Do not use excessive force when tightening the small attachment screw
(using a Phillips screwdriver)!
Stop turning the screw as soon as you feel some resistance.
PC MAPPING
2/8