RIDGID R4093 Manuel D'utilisation page 23

ASSEMBLY
To open the WSUV stand:
 Step on the release lever and pull the grips toward you
at the same time.
 Once the WSUV stand is released from the release lever,
ease the WSUV stand toward the floor by pushing the
grips toward the floor.
 With your hands on the grips, push the WSUV stand
towards the ground until the saw is in an open position.
NOTE: The release lever will close over the pin locking
the WSUV stand in an open position.
23 — English
Fig. 38