Charging
Fully charged
Charging
Standby Mode
Fig. D-2
2. Display Screen
The number on the display screen
represents the current battery level in a
percentage during charging. When the
number becomes 100, the battery is fully
charged.
Fig. D-3
How to Use
Display Screen
Vacuuming
1. Particulate Matter Amount Indicator
2. Suction Level
Eco
Auto
Turbo
3. Suction Level Switch
Press briefly to switch between eco,
auto and turbo mode.
4. Particulate Matter Types
> 10μm (eg. pollen)
> 50μm (eg. hair)
> 200μm (eg. dust)
> 500μm (eg. mite)
5. Battery Level Percentage
When the display screen shows "LO", it
indicates that the battery level is lower
than 10%.
6. Power Button
Press briefly to turn on/off
7. Dirty Level Indicator
The color changes with the amount of
dust in real time (only in Auto Mode).
Fig. E-1
Wet Cleaning
1. Battery Level Percentage
When the display screen shows "LO", it
indicates that the battery level is lower
than 10%.
2. Power Button
Press briefly to start/stop wet cleaning
Fig. E-2
Settings
In the standby state, press and hold the
suction level switch
enter the setting interface. Briefly press the
switch button
to select an option, and
press and hold
for 3 seconds to confirm.
Reset Filter
Press and hold the suction level switch
for 3 seconds to select resetting filter and
the filter will automatically complete the
reset.
Exit
Press the power button
the setting interface to return to the main
interface directly, or select
and hold
for 3 seconds to return to the
main interface.
Fig. E-3
Starting Cleaning
Press the power button
After the vacuuming is completed, press
the
button and the amount of various
particle matters vacuumed will show on the
screen.
Press the button
to switch levels between
auto, eco and turbo and the corresponding
icon will show on the screen.
Note:
• When any cleaning mode stops running,
the vacuum cleaner will default to auto
mode when it is started again. Factory
default setting is the auto mode.
• Only when running in auto mode, the
suction power and the color of the dirty
level indicator change with the amount
of particulate matter in real time.
for 3 seconds to
when it is in
, then press
to start operating.
EN
4