iScooter EU iX7 Pro Mode D'emploi page 13

Settings
To enter the settings interface, press and hold
seconds after turning on the scooter.
In the settings interface, press
P2 (cruise control), and P4 (odometer resetting).
• Zero start/ non-zero start
In the P1 setting interface, press
to switch to P11 (zero start).
• Cruise control
In the P2 setting interface, press
press to switch to P21 (cruise control turned on).
Tips: After cruise control is turned on, if the scooter moves at a speed for about 5 seconds,
it will keep moving forward at this speed without pressing the thumb accelerator.
• Reset odometer
In the P4 setting interface, press and hold
After setting, wait about 6 seconds, the setting will automatically be saved and the
display will return to the main screen.
Package Contents
1 x Scooter
Carefully check what's included. If anything is missing or damaged, please email iScooter
customer service for support.
* Keep the package box to ship back the scooter if necessary.
to switch between P1 (zero start/ non-zero start),
1 x T-Handle Hex Key
1 x Charger
and
to switch to P10 (non-zero start) or press
to switch to P20 (cruise control turned off) or
for 3 seconds.
simultaneously for 3
6 x Bolts
(including 2 spare bolts)
05