ORTHOSERVICE RO+TEN shouldfix II Mode D'emploi page 6

P U T T I N G O N T H E A P P L I A N C E
1 Insert the arm of the shoulder to be immobilised into the arm pocket.
Ensure that the orange label is outside and points upwards (fig. A).
2 Place the straps over the shoulders (fig. B), cross them at the back (fig. C), then
guide them to the front across the arm pocket and close them with the Velcro
closure (fig. D). The forearm has to be horizontal, parallel to the ground.
3 Attach the fixation band using the corresponding Velcro
(fig. E), guide around the chest (across the arm to be immobilised and under the
opposite arm) and close the band again with the Velcro
4 Attach the elbow support band by fixing it on one side at the fixation band
and on the other side at the arm pocket (fig. G).
All manuals and user guides at all-guides.com
®
closure at the arm pocket
®
closure (fig. F).
®
A B
C D
F
E
G