Air Regulation - Rizzoli TS Série Manuel D'utilisation

of the stove is not anymore necessary you have to leave the fire exhausting by
itself.
4.2 LIGHTING
To light the fire in a simple and safe, first of all we suggest to verify that the fire
grill and all the air intakes are not obstructed. Verify that the ash drawer is not full
and verify to have correct combustible for the lighting (paper, thin wood sheets,
suited products you can purchase easily).
Regulate the primary air on position 8 (maximum opening), put the combustible
as described before so that some air between the pieces could flow and light.
When the chimney is hot and the combustion is well-started charge the combus-
tion chamber as described in the technical data.
4.3

AIR REGULATION

The devices located on the fire door of the thermal stove allow to control the
working of the stove by regulating the air flow which regulates the combustion
speed.
The air regulator is governed by a graduated hand-grip. The regulator is auto-
matic and keeps steady in time the heat produced by the stove. The regulation
on low values allows a longer working of the stove, the regulation on high values
allows to obtain the maximum power.
When the combustion is finished, we suggest to close the air regulator in order to
keep the stove warm for a longer time.
4.4 STEAM EXCESS VALVE (TS 60 CF)
Cooking meals sometimes may generate a
steam excess inside the oven. For this reason
on TS 60 CF model are present two valves
that allow to eject the steam in excess. The
valves are placed on lateral walls inside the
oven and should be rotated to open the
ventilation holes before the lighting of the
stove.
Picture 10 – Steam excess valve
53