AEG TA5PB51ZAB Notice D'utilisation page 20

Pork joint, 1 kg
1)
Preheat the appliance until set temperature is reached. Do not use the function: Fast Heat Up.
2)
Use baking paper.
3)
Place the baking tray with the slope towards the door.
4)
Preheat the appliance for 10 min. Do not use the function: Fast Heat Up.
5)
Turn the meat upside down halfway through the cooking time.
6)
Use the baking tray to catch dripping liquids, place it on the first shelf position with the slope towards the fan
cover.
7)
Place the food in the glass dish and add 200 ml of water.
11. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
11.1 Notes on cleaning
Cleaning Agents
• Clean the front of the appliance only with a
microfibre cloth with warm water and a
mild detergent.
• Use a cleaning solution to clean metal
surfaces.
• Clean stains with a mild detergent.
Everyday Use
• Clean the interior of the appliance after
each use. Fat accumulation or other
residue may cause fire.
• Do not store food in the appliance for
longer than 20 minutes. Dry the interior of
the appliance only with a microfibre cloth
after each use.
Accessories
• Clean all accessories after each use and
let them dry. Use only a microfibre cloth
with warm water and a mild detergent. Do
not clean the accessories in a dishwasher.
• Do not clean the non-stick accessories
using abrasive cleaner or sharp-edged
objects.
20 ENGLISH
Turbo Grilling
7)
Wire shelf
11.2 Cleaning the cavity
embossment
Clean the cavity embossment to remove
limestone residue after cooking with steam.
For the function: SteamBake clean the
oven every 5 - 10 cooking cycles.
1. Pour 250 ml of white vinegar or citric acid
into the cavity embossment.
Use maximum 6% acidity vinegar without
any additives.
2. Let the vinegar dissolve the limestone
residue at the ambient temperature for 30
minutes.
3. Clean the cavity with warm water and a
soft cloth.
11.3 Removing the shelf supports
Remove the shelf supports to clean the
appliance.
1. Turn off the appliance and wait until it is
cold.
2. Pull the front of the shelf support away
from the side wall.
3. Pull the rear end of the shelf support
away from the side wall and remove it.
2 170 110 - 130