Hoover FREEJET 2in1 Manuel D'utilisation page 6

IMPORTANT INFORMATION
This cleaner should only be used for domestic cleaning, as described in this user guide. Please ensure that
this guide is fully understood before operating the appliance. Use only attachments recommended or
supplied by Hoover. The charger base is double insulated and must not be earthed.
Electrical Requirements
This Hoover appliance is supplied with a double insulated battery charger which is only suitable for insertion
in a 230V (UK 240V) socket outlet. Ensure that the charger rating label matches your voltage supply.
SAFETY REMINDERS
SAFETY WITH CHILDREN, ELDERLY OR THE INFIRM:
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
• DO NOT use your cleaner outdoors, on wet surfaces or for wet pick up.
• DO NOT pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items.
• DO NOT spray with, or pick up flammable liquids such as cleaning fluids, petrol, etc, or their
vapours, as they may cause an explosion or fire.
• DO NOT replace the NiMH batteries with non rechargable batteries.
• DO frequently clean the dust cup and filter assembly.
• DO return the appliance to the charger base after use to recharge the batteries. Occasionally
fully discharge the batteries to obtain the maximum battery life.
HOOVER SERVICE: To ensure the continued safe and efficient operation of this appliance we recommend
that any servicing or repairs are only carried out by an authorised Hoover service engineer.
PRODUCT COMPONENTS
Main Cleaner
A. Main Body
B. Push and Go Release Button
C. Handheld Cleaning Unit
D. Nozzle Release Button
E. Parking Lock
F. Nozzle Mode Selector
PREPARING YOU CLEANER
1. Assembly the handle by pushing it onto the main body until it locks in place [1].
2. Assembly the nozzle onto the neck of the main body. It will lock in place to remove press the nozzle
release button (D) and pull it from the main body [2].
3. Assembly the handheld cleaning unit to the main body [3].
4. Insert charger to handheld cleaning unit. For first use charge your cleaner for 24 Hrs [4]. After first use
the normal charging time is 16 Hrs.
* Features vary according to model
Handheld cleaner
G. Dust Container
H. Bin Release Button
I. Charge Socket
J. On/Off Switch
K. Bin Release Button
6
Filters Accessories
L. Shroud N. Charger
M. Filter* O. Dusting Brush
P. Crevice Tool
GB